In the meantime books have been written about miracle cures and additives. We find one that works in any case.
Tri-Star Petroleum Based Oil Amplifier, TSL
Claimed judgments:
- Reduces wear
- Reduces machine failures
- Prevents cold start damage
- Saves fuel and the environment
- Improves performance
- Provides lubrication even under extreme loads
- Extends the life of machines
Because:
TSL Oil Enhancer is an oil product made up of 11 active ingredients based on a unique and exclusive lubricating oil technology. One of the most important components is a hydrocarbon-based synthetic molecule with very special properties.
TSL Oil Enhancer is the scientific solution for lubrication in places where traditional and synthetic lubricants fall short. The combination of both active and passive components in TSL Oil Enhancer will significantly improve the performance of oil after adding TSL Oil Enhancer.
Originally developed for extreme applications, it appears that TSL Oil Enhancer also gives unique properties to traditional lubricants under normal conditions, reducing friction, resulting in less wear, a significantly lower operating temperature (especially in extreme loads), also saving energy and maintaining extended of quality of oil.
Because the TSL Oil Amplifier molecules are thermally reactive, TSL Oil Amplifier neutralizes so-called "hot spots" which are caused by friction and thus repairs the protective layer on metal. Applied in combustion engines, TSL Oil Booster prevents temperature rise of essential parts such as camshaft, rocker arms, valve stems, etc. Also applied in other places such as gearboxes and hydraulic systems, the same effect will occur, ie lower operating temperatures.
TSL Oil booster is extremely concentrated. An 3% addition is sufficient for most lubrication systems. Although it is permitted to provide a higher percentage of TSL for lubrication systems, it is not necessary for most applications. Heavier loads, such as in gearboxes, differentials, gearboxes and other heat-generating applications, can be provided with 3% TSL Oil Enhancer for optimum results. For first application in motor carts 5% TSL addition
Due to its low frictional resistance, TSL Oil Amplifier may not be added without prior consultation in wet clutch plates, vane clutches and automatic gearboxes. A much lower percentage is added here depending on the existing oil.
No sulfur ...
TSL does not contain:
PTFE additives (teflon)
Graphite
Lead
Molybdenum
Chlorinated solvents
Active sulfur compounds
Application:
Crankcase of an internal combustion engine: 5% = 50 ml TSL per liter of oil the first time.
With each subsequent oil change: 3% = 30 ml TSL per liter of oil.
Gearboxes, hydraulic systems: 30 ml TSL per liter of oil.
TSL thus contains unique active and passive chemical components. And certainly the passive parts cannot hurt. But the most convincing point ever was that Jerry van Heiden, the famous XS650 tuner - www.heidentuning.com - used the stuff enthusiastically in his own creations. TSL is a petroleum derivative. So there are no atomic things or Teflon in it.
These active ingredients provide direct protection against friction and wear.
The passive components attach to the metal and provide long-term protection.
Conventional one-off metal and motor treatments only have a temporary effect, so these treatments must be renewed or supplemented.
On the other hand, additions to the oil generally have the limitation that they can only become active when the temperature of the oil rises. Only at high temperatures are the friction-reducing components activated.
TSL is composed in such a way that the best properties of both treatments are utilized. That's handy.
For the Connoisseurs: Characteristic features:
- Density, gr / cm at 15 ° C ASTM - D 1298 1.079
- Sulphate-containing ash in% ASTM - D 874 0.14
- Flash point COC ° F (° C) ASTM - D 92 325 (163)
- Focal point COC ° F (° C) ASTM - D 92 335 (169)
- Total Base Number ASTM - D 2896 3.4
- Total Acid Number ASTM - D 664 1.9
- Pour point ° F (° C) ASTM - D 97 -35 (-37)
- Color ASTM - D 1500 2.6
- Viscosity Cst at 100 ° C ASTM - D 445 4.86
- Foam tests ASTM - D 892 allowable 0 / 0 / 0
- Denison HF2 permissible
- Vickers permissible
- Cincinnati Milacron admissible
- Zinc content in% by weight .04
- Copper content in% by weight .00
- Copper strip corrosion ASTM - D 130 1A permissible
We have no reaction from XADO yet. But are TSL users very satisfied?
Distributor: All Star Trade in Maarssen, www.tsl-allstar.nl